
Add to Cart
PCD-60-700B 60w 700mA AC phase cut dimming led driver, 115VAC or 230VAC meanwell
PCD series is economical AC/DC converter constant current design dimmable LED power supply series. Incorporating a built-in active PFC design, PCD led driver series built-in AC phase-cut dimming, work with leading and trailing edge triac dimmers. Fully isolated plastic case with IP42 level, suitable for built in LED lighting. PCD series switching power supply cooling by free air convection and with 115VAC or 230VAC models. This power supply combined with connectors provide a pleasing and imposing aesthetic with a unique and function design that combines modern aesthetics with the power of a high- grade product. Mean well PLM series power supply range from 16 to 60 watts has been earning supreme customer’s rating for a long time.
MODEL | PCD-16-350B | PCD-16-700B | PCD-16-1050B | PCD-16-1400B | |
RATED CURRENT | 350mA | 700mA | 1050mA | 1400mA | |
OPERATINGVOLTAGE RANGE | 24 ~ 48V | 16 ~ 24V | 12 ~ 16V | 8 ~ 12V | |
CURRENT RANGE | 0 ~ 350mA | 0 ~ 700mA | 0 ~ 1050mA | 0 ~ 1400mA | |
CURRENT ACCURACY | ±5% | ||||
RATED POWER | 16.8W | 16.8W | 16.8W | 16.8W | |
RIPPLE & NOISE | 4.6Vp-p | 2.7Vp-p | 2.2Vp-p | 2Vp-p | |
NO LOAD OUTPUT VOLTAGE | 63V | 35V | 25V | 16V | |
SETUP TIME | 1000ms / 230VAC 2000ms / 115VAC at full load | ||||
INPUT | FREQUENCY RANGE | 47 ~ 63Hz | |||
POWER FACTOR | PF>0.9/115VAC, PF>0.9/230VAC, PF>0.9/277VAC at full load (Please refer to "Power Factor Characteristic" curve) | ||||
EFFICIENCY | 82% | 81% | 80.5% | 80% | |
AC CURRENT | 0.4A/115VAC 0.2A/230VAC 0.15A/277VAC | ||||
INRUSH CURRENT | COLD START 10A(twidth=90μs measured at 50% Ipeak) at 230VAC | ||||
LEAKAGE CURRENT | <0.5mA / 240VAC | ||||
PROTECTION | SHORT CIRCUIT | Hiccup mode, recovers automatically after fault condition is removed. | |||
OVER TEMPERATURE | 95°C ±10°C (RTH1) | ||||
Protection type : Shut down o/p voltage, re-power on to recover | |||||
ENVIRONMENT | WORKING TEMP. | -30 ~ +60°C (Refer to output load derating curve) | |||
WORKING HUMIDITY | 20 ~ 95% RH non-condensing | ||||
STORAGE TEMP., HUMIDITY | -40 ~ +80°C , 10 ~ 95% RH | ||||
TEMP. COEFFICIENT | 0.03%/°C (0 ~ 50°C ) | ||||
VIBRATION | 10 ~ 500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes | ||||
SAFETY &EMC | SAFETY STANDARDS | U8750, CSA C22.2 No. 250.0-08(except for PCD-16-350, PCD-25-350, PCD-25-700), ENEC EN613471, EN61347-2-13, EN62384(for B type only), IP30 approved ; design refer to U60950-1, TUV EN60950-1, EN61347-1, EN61347-2-13 | |||
WITHSTAND VOLTAGE | I/P-O/P:3.75KVAC | ||||
ISOLATION RESISTANCE | I/P-O/P:100M Ohms / 500VDC / 25°C / 70% RH | ||||
EMC EMISSION | Compliance to EN55015 (B type only), EN61000-3-2 Class C ; EN61000-3-3, FCC part 18 non-consumer equipment (A type only) | ||||
EMS IMMUNITY | Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024,EN61547, light industry level, criteria A | ||||
OTHERS | MTBF | 906.5K hrs min. MIL-HDBK-217F (25°C ) | |||
DIMENSION | 84*57*29.5mm (L*W*H) | ||||
PACKING | 0.19Kg; 72pcs/14.7Kg/0.75CUFT |